 Microprocessor | |
| Common manufacturer | NXP Semiconductors |
|---|---|
| Max. CPU clock rate | to 300 MHz |
| Cores | 1 |
| Application | Embedded systems |
| Instruction set | Modified Motorola 68000 family |
| Predecessor | Motorola 68060 |
The NXP ColdFire is a microprocessor that derives from the Motorola 68000 family architecture, manufactured for embedded systems development by NXP Semiconductors. It was formerly manufactured by (formerly the semiconductor division of ) which merged with NXP in 2015.
Where NXP ColdFire leads. Every connection below has a source: a link in this article, a shared Wikipedia category, or CirrusSearch text similarity. Articles already on your trail are left out.
550 words · 18 references · revision 1374415658 · CC BY-SA 4.0
The articles this one links to most, weighted towards the introduction.
The ColdFire instruction set is "assembly source" compatible (by means of translation software available from the vendor) and not entirely object code compatible with the 68000. When compared to classic 68k hardware, the instruction set differs mainly in that it no longer has support for the binary-coded decimal (BCD) packed data format; it removes a number of other, less used instructions; and most instructions that are kept support fewer addressing modes. Also, floating point intermediates are 64 bits and not 80 bits as in the 68881 and 68882 coprocessors. The instructions are only 16, 32, or 48 bits long, a simplification compared to the 68000 series.
There are five generations or versions of the ColdFire available from Freescale:
There is also the Fido 1100, a microcontroller launched in 2007 aimed at predictable embedded control systems such as Industrial Ethernet applications using the 68k/CPU32 instruction set. However, Fido has its own unique architecture and shares the instruction set with 68k only.1
In November 2006, Freescale announced that ColdFire microprocessor cores were available for license as semiconductor Intellectual Property through their IP licensing and support partner IPextreme Inc.23 ColdFire v1 core is now available under Free license (and no per use royalty) for Altera Cyclone-III FPGA's.45
In September 2007, Freescale launched the 32-bit Flexis microcontroller family with a ColdFire CPU core.6
In June 2010, Freescale announced the ColdFire+ line, which is a ColdFire V1 core using a 90 nm TFS technology.7
In 2010, Freescale also launched Kinetis, an ARM-based product line, leading some industry observers8 to speculate about the future of the ColdFire range, given that Freescale would have several competing CPU ranges.
In February 1999, the μClinux project's Linux kernel was ported to two ColdFire processors (MCF5206 and MCF5307).9 In 2006, the Debian project was looking into making its m68k port compatible with the ColdFires,10 as there are ColdFire models that can be clocked as high as 300 MHz. This is much faster than the 68060, which can officially reach 75 MHz11 and can be overclocked to 110 MHz.
Stallion Technologies ePipe,12 Secure Computing SnapGear13 security appliances, and Arcturus Networks's System on Module products14 are based on ColdFire processors. There are ColdFire Linux-based single-board computers (SBC) with Ethernet and CompactFlash as small as 23×55 mm or 45×45 mm15 or based on CompactFlash (37×43 mm) itself.16 ColdFire based products have even been deployed to the International Space Station as an electronic nose project.1718
{{cite web}}: CS1 maint: deprecated archival service (link){{citation}}: CS1 maint: deprecated archival service (link)180 revisions in total · 131 contributors
